AdBlock-Fast

Official Feed Web UI Memory Startup AGPL-3.0-or-later

Description

AdBlock-Fast is a high-performance ad-blocking service for OpenWrt that integrates with Dnsmasq, SmartDNS, and Unbound. It supports parallel downloading and processing of remote block- and allow-lists, optimizing them into efficient resolver-compatible formats.

Unlike traditional solutions, AdBlock-Fast does not run as a background service — it performs its tasks and exits, leaving minimal memory usage. It also supports a lean mode, allowing direct use of pre-built dnsmasq config files without processing.

An optional LuCI Web UI (luci-app-adblock-fast) makes configuration easy, including adding custom block/allow lists. Both the core package and the Web UI are available in the official OpenWrt package repositories.

Starting with version 1.1.4, AdBlock-Fast performs a DNS resolver configuration test before restarting the resolver and runs a post-restart health check to verify working DNS resolution. If the health check fails, the service can automatically revert to the previous known-good state without ad-blocking to maintain internet connectivity.

Why AdBlock-Fast?

AdBlock-Fast is designed for performance and simplicity. It processes block-lists in parallel and exits after generating optimized configuration for your DNS resolver—no background daemons, no memory bloat.

  • Blazing fast startup: Downloads and parses block-lists concurrently, significantly reducing startup time.
  • Low memory footprint: Only consumes memory during processing—no persistent background processes.
  • Highly flexible: Supports multiple DNS backends including dnsmasq, smartdns, and unbound.
  • Web UI available: Optional LuCI interface (luci-app-adblock-fast) provides easy configuration and management.
  • Modern DNS support: Works with encrypted DNS (DoH) browsers via ipset/nftset integration.
  • Lean mode available: Skip processing entirely by using pre-built dnsmasq config files.
  • Persistent cache option: Saves a compressed block-list across reboots to save time and bandwidth.
  • Officially supported: Both the core package and its Web UI (luci-app-adblock-fast) are available in the official OpenWrt repositories.

Features

  • Super-fast due to the nature of supported allow/block-lists, parallel downloading/processing of the block-lists and fast block-list parsing code.
  • Supports multiple remote allow/block-lists formats, as well as using a remote dnsmasq config file with no parsing.
  • Everything is configurable from Web UI.
  • Allows you to easily add your own domains to allow-list or block-list.
  • Allows you to easily add URLs to your own blocked hosts or domains lists to allow/block-list (just put allowed domains one per line in the file you’re linking).
  • Supports multiple modes of ad-blocking implementations with Dnsmasq, SmartDNS and Unbound.
  • Supports lean mode by quickly downloading and using (without processing, which can be resource/time-intensive on older devices) remote dnsmasq ad-blocking config file.
  • Doesn’t stay in memory – creates the list of blocked domains and then uses Dnsmasq/SmartDNS/Unbound and firewall rules to serve NXDOMAIN or 127.0.0.1 reply or to reject access (depending on settings) for blocked domains.
  • As some of the default lists are using https, reliably works with either wget/libopenssl, uclient-fetch/libustream-mbedtls or curl (recommended).
  • Very lightweight and easily hackable, the whole script is just one /etc/init.d/adblock-fast file.
  • Retains the downloaded/sorted ad-blocking list on service stop and reuses it on service start (use dl command if you want to force re-download of the list).
  • Has an option to store a compressed copy of the ad-blocking list in persistent memory which survives reboots.
  • Blocks ads served over https (unlike PixelServ-derived solutions).
  • Blocks ads inside browsers with built-in DNS-over-HTTPS proxy enabled, like Mozilla Firefox or Google Chrome/Chromium – with the dnsmasq.ipset or dnsmasq.nftset options (where supported by installed Dnsmasq).
  • Proudly made in Canada, using locally-sourced electrons.

If you want an ad-blocking using pre-selected curated remote block-lists only, supporting Internationalized Domain Names and richer WebUI, check out net/adblock on GitHub/jsDelivr.

Screenshots (luci-app-adblock-fast)

Service Status

screenshot

Configuration - Basic Configuration

screenshot

Configuration - Advanced Configuration

screenshot

Allowed and Blocked Domains Management

screenshot

Allowed and Blocked Lists Management

screenshot

Requirements

The required packages should be automatically installed when you install adblock-fast.

Requirements for DNS Resolver

In order to actually block the ads, this service requires one of the following DNS resolvers to be installed on your router: dnsmasq, dnsmasq-full, smartdns or unbound. The dnsmasq package is usually included in the default OpenWrt installation.

If you want to use the dnsmasq.ipset option you need to install ipset and dnsmasq-full with ipset support instead of the dnsmasq.

If you want to use the dnsmasq.nftset option you need to install dnsmasq-full with nftset support instead of the dnsmasq.

By default, dnsmasq-full in OpenWrt 22.03 and earlier supports only ipset, the dnsmasq-full in OpenWrt 23.05 and later supports only nftset.

To upgrade from dnsmasq to dnsmasq-full, connect to your router via ssh and run the following command:

opkg update; cd /tmp/ && opkg download dnsmasq-full; opkg install ipset libnettle8 libnetfilter-conntrack3;
opkg remove dnsmasq; opkg install dnsmasq-full --cache /tmp/; rm -f /tmp/dnsmasq-full*.ipk;

Requirements for IPv6 Support

All of the supported domain-based blocking options (resolver set to dnsmasq.addnhosts, dnsmasq.conf, dnsmasq.servers, smartdns.domainset and unbound.adb_list) are IP-family agnostic and should work with both IPv4 and IPv6 networking.

For IPv6 support using the IP-based blocking (resolver set to dnsmasq.ipset, dnsmasq.nftset, smartdns.ipset or smartdns.nftset) on OpenWrt 21.02 and earlier, additionally install ip6tables-mod-nat and kmod-ipt-nat6 packages from Web UI or run the following in the command line:

opkg update; opkg install ip6tables-mod-nat kmod-ipt-nat6;

The IP-based blocking (resolver set to dnsmasq.ipset, dnsmasq.nftset, smartdns.ipset or smartdns.nftset) is not guaranteed to work on OpenWrt 22.03 due to the fact that the dnsmasq-full available in 22.03 repository only has support for ipset, not the nftset, however the default netfilter is nft, not iptables, I’d advise you to upgrade to OpenWrt 23.05 or newer if you need to switch to the IP-based blocking.

The IPv6 support is included by default in OpenWrt 23.05 and later images, so no additional steps are needed to enable IPv6 with IP-based blocking (resolver set to dnsmasq.ipset, dnsmasq.nftset, smartdns.ipset or smartdns.nftset) on OpenWrt 23.05 and later.

Requirements for Faster Block-list Processing

The gawk, grep, sed and coreutils-sort are the optional, but recommended packages as they speed up processing dramatically. You can install these recommended packages by running the following command:

opkg --force-overwrite install gawk grep sed coreutils-sort

Unmet Dependencies

If you are running a development (snapshot) build of OpenWrt on your router and your build is outdated (meaning that packages of the same revision/commit hash are no longer available and when you try to satisfy the requirements you get errors), please flash either current OpenWrt release image or current development/snapshot image.

How To Install

Install adblock-fast and luci-app-adblock-fast packages from Web UI or run the following in the command line:

opkg update; opkg install adblock-fast luci-app-adblock-fast

If adblock-fast and luci-app-adblock-fast packages are not found in the official feed/repo for your version of OpenWrt, you will need to add a custom repo to your router following instructions on GitHub/jsDelivr first.

Default Settings

Default configuration has the service disabled (use Web UI to enable/start service or run uci set adblock-fast.config.enabled=1; uci commit adblock-fast;) and selected ad/malware lists suitable for routers with 64Mb RAM.

If your router has less then 64Mb RAM, edit the configuration file, located at /etc/config/adblock-fast. The configuration file has lists in ascending order starting with smallest ones and each list has a preceding comment indicating its size, comment out or delete the lists you don’t want or your router can’t handle.

How To Customize

You can use Web UI (found in Services/Simple AdBlock) to add/remove/edit links to:

  • Hosts files (127.0.0.1 or 0.0.0.0 followed by space and domain name per line) to be blocked.
  • Domains lists (one domain name per line) to be blocked.
  • AdBlockPlus lists of domains to be blocked.
  • Domains lists (one domain name per line) to be allowed. It is useful if you want to run adblock-fast on multiple routers and maintain one centralized allow-list which you can publish on a web-server.

Please note that these lists must include either http:// or https:// (or, if curl is installed the file://) prefix. Some of the top block-lists (both hosts files and domains lists) suitable for routers with at least 8MB RAM are used in the default adblock-fast installation.

You can also use Web UI to add individual domains to be blocked or allowed.

If you want to use CLI to customize adblock-fast config, refer to the Configuration section.

How To Use External Dnsmasq Config File

You can also configure adblock-fast to just fetch the pre-made dnsmasq config file, which it will download and use without further processing. To use this, you can quickly configure adblock-fast like:

uci set adblock-fast.config.dns='dnsmasq.conf'
uci set adblock-fast.dnsmasq_config_file_url='https://small.oisd.nl/dnsmasq2'
uci commit adblock-fast
service adblock-fast start

How To Use

Once the service is enabled in the config file, run /etc/init.d/adblock-fast start to start the service. Either /etc/init.d/adblock-fast restart or /etc/init.d/adblock-fast reload will only restart the service and/or re-download the lists if there were relevant changes in the config file since the last successful start. Had the previous start resulted in any error, either /etc/init.d/adblock-fast start, /etc/init.d/adblock-fast restart or /etc/init.d/adblock-fast reload will attempt to re-download the lists.

If you want to remove the domain(s) from the current block-list and add domain(s) to the config’s allow-list, run /etc/init.d/adblock-fast allow test-domain.com.

If you want to check if the specific domain (or part of the domain name) is being blocked, run /etc/init.d/adblock-fast check test-domain.com.

If you want to force adblock-fast to re-download the lists, run /etc/init.d/adblock-fast dl.

How to Schedule Redownloads

The command to force-redownload the lists is /etc/init.d/adblock-fast dl and this is what I use:

  echo '21 4 */3 * * /etc/init.d/adblock-fast dl' >> /etc/crontabs/root

Adblock-fast Configuration

Configuration

In the Web UI settings for the adblock-fast are split into basic and advanced tabs. The full list of configuration parameters of adblock-fast.config section is:

Web UI Section Option Type Default Description
Basic enabled boolean 0 Enable/disable the adblock-fast service.
Basic config_update_enabled boolean 0 Enable/disable the adblock-fast config update. Oftentimes, the URLs to the blocked hosts/domains files become obsolete/outdated, resulting in the error during lists download stage. adblock-fast already updates users’ config files during install/reinstall, if you enable this variable it will also attempt to fetch and use the most recent config update file before downloading allow/block-lists.
- config_update_url string Config Update File By default, the config update URL is set to fetch the config update file from the jsDelivr CDN cache of the official OpenWrt source code repository. You can set it to a different URL from CLI/uci only if you wish.
- procd_trigger_wan6 boolean 0 The service is started on WAN interface updates. As OpenWrt may have floods of WAN6 updates, the workaround for having the service started was to implement the procd_trigger_wan6 boolean option (set to 0 as default) to enable/disable service start to be triggered by the WAN6 updates.
- procd_boot_wan_timeout integer 60 The time (in seconds) the service will wait for the WAN interface discovery on boot.
- heartbeat_domain string heartbeat.melmac.ca The domain name to be probed after successful final block-list creation and resolver restart to verify working DNS resolution. You’re welcome to change it to any popular/quickly-resolving domain name which is not blocked by your ISP/authorities. This check is skipped if the block-list is restored from cache.
- heartbeat_sleep_timeout integer (1-60) 10 The time (in seconds) the service will try to probe heartbeat_domain after resolver restart with the final block-list.
- update_config_sizes boolean 1 When set to 1 (by default) service will update its config file with the file-size information for remote lists when they are downloaded or when the size command is issued. Setting this to 0 prevents writing updates sizes information to the config file thus reducing flash memory wear where applicable.
Basic verbosity integer 2 Can be set to 0, 1 or 2 to control the console and system log output verbosity of the adblock-fast service.
Basic force_dns boolean 1 Force router’s DNS to local devices which may have different/hardcoded DNS server settings. If enabled, creates a firewall rule to intercept DNS requests from local devices to external DNS servers and redirect them to router.
  force_dns_interface list lan List of interfaces to force router DNS on. You only need to change it if you have changed/appended default LAN interface in /etc/config/network
  force_dns_port list 53 853 List of ports to force router’s DNS on.
Basic led string none Use one of the router LEDs to indicate the ad-blocking status.
Basic dns string dnsmasq.servers DNS Resolver option. See table below for addtional information.
Basic dnsmasq_instance list * List of Dnsmasq instance numbers (or ‘*’ for all) to be affected by the service. This option is only visible in Web UI if the dnsmasq.addnhosts or dnsmasq.servers are selected as the DNS Resolver option.
Basic dnsmasq_config_file_url string   Link (URL) to the dnsmasq config file. If this option is set (non-empty), all the other lists are ignored (and will be deleted when you click Save & Apply in the WebUI). The dnsmasq config file is downloaded and used as is (not optimized). This option is only visible in Web UI if the dnsmasq.conf is selected as the DNS Resolver. See How To Use External Dnsmasq Config File for more information.
Basic smartdns_instance list * List of SmartDNS instance numbers (or ‘*’ for all) to be affected by the service. This option is only visible in Web UI if the smartdns.domainset or smartdns.nftset are selected as the DNS Resolver option.
Advanced ipv6_enabled boolean 0 Add IPv6 entries to block-list if dnsmasq.addnhosts is used. This option is only visible in Web UI if the dnsmasq.addnhosts is selected as the DNS Resolver option.
Advanced download_timeout integer 10 Time-out downloads if no reply received within that many last seconds.
Advanced curl_additional_param string   If curl is installed and detected, you can pass any additional parameters to curl command line with this option.
Advanced curl_max_file_size integer 30000000 If curl is installed and detected, it would not download files bigger than this.
Advanced curl_retry integer 3 If curl is installed and detected, attempt that many retries for failed downloads.
Advanced parallel_downloads boolean 1 If enabled, all downloads are completed concurrently, if disabled – sequentioally. Concurrent downloads dramatically speed up service loading.
Advanced debug boolean 0 If enabled, output service full debug to /tmp/adblock-fast.log. Please note that the debug file may clog up the router’s RAM on some devices. Use with caution.
Advanced allow_non_ascii boolean 0 Enable support for non-ASCII characters in the final ad-blocking file. Only enable if your target service supports non-ASCII characters. If you enable this on the system where DNS resolver doesn’t support non-ASCII characters, it will crash. Use with caution.
Advanced compressed_cache boolean 0 Create compressed cache of the ad-blocking file in router’s persistent memory. Only recommended to be used on routers with large ROM and/or routers with metered/flaky internet connection.
Advanced compressed_cache_dir directory /etc Create compressed cache of the ad-blocking file in this directory. This option is only visible in Web UI if the compressed_cache option is enabled.

Allowed and Blocked Lists URLs

The lists of allowed and blocked domains are controlled by the unnamed file_url sections, the available options for each section are:

Option Type Default Description
action String block Either allow or block.
enabled Boolean 1 Set to 0 to disable processing of this list.
name String   You can add the name for the list to be displayed in the WebUI and CLI output.
size Integer   Sizes for lists are automatically adjust upon download or migration from simple-adblock.
url String   URL to the remote allow/block-lists. Must include either http:// or https:// (with curl installed may use the file://) prefix. Recognized formats are listed below.

DNS Resolver Option

Currently supported options are:

Option Explanation
dnsmasq.addnhosts Creates the Dnsmasq additional hosts file /var/run/adblock-fast.addnhosts and modifies Dnsmasq settings, so that Dnsmasq resolves all blocked domains to “local machine”: 127.0.0.1. This option doesn’t allow block-list optimization (by removing secondary level domains if the top-level domain is also in the block-list), so it results in a much larger block-list file, but, unlike other Dnsmasq-based options, it has almost no effect on the DNS look up speed. This option also allows quick reloads of Dnsmasq on block-list updates. This setting also allows you to configure which Dnsmasq instances would be affected by ad-blocking via dnsmasq_instance option.
dnsmasq.conf Creates the Dnsmasq config file /var/dnsmasq.d/adblock-fast so that Dnsmasq replies with NXDOMAIN: “domain not found”. This option allows the block-list optimization (by removing secondary level domains if the top-level domain is also in the block-list), resulting in the smaller block-list file. This option also allows using top-level domains in the blocked_domain options to block the entire TLD. This option also allows the use of the dnsmasq_config_file_url setting which can be pointed to a pre-made dnsmasq config file which is used as is, without optimization or compressed cache creation. This option will slow down DNS look up speed somewhat.
dnsmasq.ipset Creates the Dnsmasq ipset file /var/dnsmasq.d/adblock-fast.ipset and the firewall rule to reject the matching requests. This is the only option for ad-blocking if you’re using a browser with built-in DNS-over-HTTPS proxy enabled, like Mozilla Firefox or Google Chrome/Chromium. This option allows the block-list optimization (by removing secondary level domains if the top-level domain is also in the block-list), resulting in the smaller block-list file. This option requires installation of dnsmasq-full and ipset packages.
PLEASE NOTE, that unlike other options which are truly domain name based blocking, this is essentially an IP address based blocking, ie: if you try to block google-analytics.com with this option, it may also block/break things like YouTube, Hangouts and other Google services if they share IP address(es) with google-analytics.com.
dnsmasq.nftset Creates the Dnsmasq nft set file /var/dnsmasq.d/adblock-fast.nftset and the firewall rule to reject the matching requests. This is the only option for ad-blocking if you’re using a browser with built-in DNS-over-HTTPS proxy enabled, like Mozilla Firefox or Google Chrome/Chromium. This option allows the block-list optimization (by removing secondary level domains if the top-level domain is also in the block-list), resulting in the smaller block-list file. This option requires installation of dnsmasq-full and nft packages.
PLEASE NOTE, that unlike other options which are truly domain name based blocking, this is essentially an IP address based blocking, ie: if you try to block google-analytics.com with this option, it may also block/break things like YouTube, Hangouts and other Google services if they share IP address(es) with google-analytics.com.
dnsmasq.servers Creates the Dnsmasq servers file /var/run/adblock-fast.servers and modifies Dnsmasq settings so that Dnsmasq replies with NXDOMAIN: “domain not found”. This option allows the block-list optimization (by removing secondary level domains if the top-level domain is also in the block-list), resulting in the smaller block-list file. This is a default setting as it results in the smaller block-file and allows quick reloads of Dnsmasq. This setting also allows you to configure which Dnsmasq instances would be affected by ad-blocking via dnsmasq_instance option. This option will slow down DNS look up speed somewhat.
smartdns.domainset Creates the SmartDNS domain-set file and modifies SmartDNS settings so that SmartDNS replies with NXDOMAIN: “domain not found”. This option allows the block-list optimization (by removing secondary level domains if the top-level domain is also in the block-list), resulting in the smaller block-list file. This option will slow down DNS look up speed somewhat. This is a recommended SmartDNS setting as it results in the smaller block-file and allows quick reloads of SmartDNS. This setting also allows you to configure which SmartDNS instances would be affected by ad-blocking via smartdns_instance option.
smartdns.ipset Creates the SmartDNS ipset file and the firewall rule to reject the matching requests. This is the only option for ad-blocking if you’re using a browser with DNS-over-HTTPS proxy built-in, like Mozilla Firefox or Google Chrome/Chromium. This option allows the block-list optimization (by removing secondary level domains if the top-level domain is also in the block-list), resulting in the smaller block-list file. This option is recommended for OpenWrt 21.02 and earlier only.
PLEASE NOTE, that unlike other options which are truly domain name based blocking, this is essentially an IP address based blocking, ie: if you try to block google-analytics.com with this option, it may also block/break things like YouTube, Hangouts and other Google services if they share IP address(es) with google-analytics.com.
smartdns.nftset Creates the SmartDNS nft set file and and the firewall rule to reject the matching requests. This is the only option for ad-blocking if you’re using a browser with DNS-over-HTTPS proxy built-in, like Mozilla Firefox or Google Chrome/Chromium. This option allows the block-list optimization (by removing secondary level domains if the top-level domain is also in the block-list), resulting in the smaller block-list file. This option allows the block-list optimization (by removing secondary level domains if the top-level domain is also in the block-list), resulting in the smaller block-list file. This option is recommended for OpenWrt 22.03 and later/newer.
PLEASE NOTE, that unlike other options which are truly domain name based blocking, this is essentially an IP address based blocking, ie: if you try to block google-analytics.com with this option, it may also block/break things like YouTube, Hangouts and other Google services if they share IP address(es) with google-analytics.com.
unbound.adb_list Creates the Unbound config file /var/lib/unbound/adb_list.adblock-fast so that Unbound replies with NXDOMAIN: “domain not found”. This option allows the block-list optimization (by removing secondary level domains if the top-level domain is also in the block-list), resulting in the smaller block-list file.

Default config

The default config file installed with the package can be found at the source repository. The config file contains some comments to explain some settings and the lists which are too big for most routers are commented out by default as well.

How Does It Work

This service downloads (and processes in the background, removing comments and other useless data) lists of hosts and domains to be blocked, combines those lists into one big block-list, removes duplicates and sorts it and then removes your allowed domains from the block-list before converting to to Dnsmasq/SmartDNS/Unbound-compatible file and restarting Dnsmasq/SmartDNS/Unbound if needed. The result of the process is that Dnsmasq/SmartDNS/Unbound return NXDOMAIN or 127.0.0.1 (depending on settings) for the blocked domains.

If you specify google.com as a domain to be allowed, you will have access to google.com, www.google.com, analytics.google.com, but not fake domains like email-google.com or drive.google.com.verify.signin.normandeassociation.com for example. If you only want to allow www.google.com while blocking all other google.com subdomains, just specify www.google.com as domain to be allowed.

In general, whatever domain is specified to be allowed; it, along with with its subdomains will be allowed, but not any fake domains containing it.

Recognized remote allow/block-list file formats

The service can parse the remote allow/block-lists in the following formats:

  • AdBlockPlus format
  • Dnsmasq format with address= assignments
  • Dnsmasq format with local= assignments
  • Dnsmasq format with server= assignments
  • Hosts file
  • Domains list (plain text with one domain per line)

How It Does Not Work

For most of the DNS Resolver Options to work, your local LAN clients need to be set to use your router’s DNS (by default 192.168.1.1). The dnsmasq.addnhosts is the only option which can help you block ads if your local LAN clients are NOT using your router’s DNS. There are multiple ways your local LAN clients can be set to NOT use your router’s DNS:

  1. Hardcoded on the device. Some Android Lollipop 5.0 phones, some media-centric tablets and some streaming devices for example are known to have hardcoded DNS servers and they ignore your router’s DNS settings. You can fix this by either:
    • Rooting your device and changing it from hardcoded DNS servers to obtaining DNS servers from DHCP.
    • Enabling adblock-fast’s force_dns setting to override the hardcoded DNS on your device.
  2. Manually set on the device. Instead of setting your device to obtain the DNS settings via DHCP, you can set the DNS servers manually. There are some guides online which recommend manually changing the DNS servers on your computer to Google’s (8.8.8.8) or Cloudflare’s (1.1.1.1) or OpenDNS (208.67.222.222). You can fix this by either:
    • Changing the on-device DNS settings from manual to obtaining DNS servers from DHCP and changing your router’s DNS settings to use the DNS from Google, Cloudflare or OpenDNS respectively.
    • Enabling adblock-fast’s force_dns setting to override the hardcoded DNS on your device.
  3. Sent to your device from router via DHCP Options. You can fix this by either:
    • Removing DHCP Options 5 and 6 from your router’s /etc/config/dhcp file.
    • Enabling adblock-fast’s force_dns setting to override the hardcoded DNS on your device.
  4. By using the DNS-over-TLS, DNS-over-HTTPS or DNSCrypt on your local device or (if supported) by browser on your local device. You can fix this only by:
    • Stopping/removing/disabling DNS-over-TLS, DNS-over-HTTPS or DNSCrypt on your local device and using the secure DNS on your router instead. There are merits to all three of the options above, I can recommend the https-dns-proxy and luci-app-https-dns-proxy packages for enabling DNS-over-HTTPS on your router.

  5. If you are running a wireguard “server” on your router and remote clients connect to it, the ad-blocking may not work properly for your remote clients until you add the following to /etc/network (credit to dibdot):

    config route
  option interface 'wg0'
  option target '192.168.1.0'
  option netmask '255.255.255.0'

Documentation / Discussion

Please head to OpenWrt Forum for discussion of this package.

If you find adblock-fast or luci-app-adblock-fast useful, know that your help is needed. Please consider donating to support development of this project. I’ve been developing it in my spare time without any external funding, outside of my GitHub sponsors. You can donate by:

Explanation of some warnings and errors

Internal version mismatch

When you visit the WebUI page of luci-app-adblock-fast, it checks the internal versions of 3 components:

  • adblock-fast: internal version stamp of principal package
  • luci-app-adblock-fast:
    • internal version stamp of the Javascript code you’re seeing in the browser
    • internal version stamp of the RPCD script which pulls information from your device and supplies it to the Javascript code

Because of the way the principal app integrates with the WebUI, it is important that all three internal versions are in sync or at least the luci-app-adblock-fast internal versions are not lower than the adblock-fast internal version.

If you’re seeing this message, make sure that the versions of the adblock-fast and luci-app-adblock-fast reported by opkg or apk on your device are the same by running:

command -v opkg > /dev/null 2>&1 && opkg list-installed | grep adblock-fast
command -v apk > /dev/null 2>&1 && apk list --installed | grep adblock-fast

If you have the matching versions of the adblock-fast and luci-app-adblock-fast installed you may still be seeing the Version Mismatch message.

  • If the luciCompat is lower than packageCompat, it means that your browser has cached the Javascript code for WebUI, it may be outdated until you refresh/delete the browser cache (or open your device WebUI in Incognito mode or a different browser).
  • If the rpcdCompat is lower than the packageCompat, it means that the RPCD service needs to be restarted (run service rpcd restart and re-login to WebUI or just reboot your device).

Thanks

I’d like to thank everyone who helped create, test and troubleshoot this service. Special thanks to @hnyman for general package/luci guidance, @dibdot for general guidance and block-list optimization code, @ckuethe for the curl support, non-ASCII filtering and compressed cache code, @EricLuehrsen for the Unbound support information, @vgaetera for firewall-related advice, @mushoz for performance testing, @phasecat for submitting various bugs and testing and @justops1337 for various fixes and major performance improvements.